For winter storage, store the cleaner in a place where it will be protected from cold temperatures. Never store the cleaner with dirty filter cartridges or debris canister. Remember: staying on top of maintaining your pool will keep it gunk-free for your swimmers for years to come. Filter cleaning solution can be used to remove D.E., excessive dirt and/or sand. For a faster (90 minutes) cleaning of the main pool area, the Quick Clean mode can be selected (Available on Quick Clean model only). 
A suction-side cleaner attaches to your pool filter to create suction.
Ensure that children do not attempt to access the cleaner while it is operating. It is normal for the cleaner to operate in both forward and reverse directions. Slowly and steadily move your vacuum back and forth along the surface to vacuum the pool and remove dirt and debris. This could create a safety hazard and/or damage to the cleaner. 7 Finally, turn the filtration system back on to remove any residual floating debris. Important note: Be sure not to rush through this job and stir up the debris at the bottom of the pool. The cleaner should not be used to remove plaster dust or construction debris from new or renovated pools. The downside to these is that you have to replace the bags often, but they do reduce wear and tear on your pools filter by collecting their own debris. I recommend a robotic cleaner for large pools or pools with hard-to-reach areas as most can be operated by remote control.
Excessive use is unnecessary and will cause cleaner parts to prematurely wear. CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or property damage and, if ignored, presents a potential hazard. How to vacuum your pool with a garden hose, How to clean your pool with a sand filter, Why it's worth investing in an automatic cleaner, Unger Professional Connect & Clean 7 - 20 Foot Telescoping Extension Multi-Purpose Pole, Window Cleaning, Dusting, Poolmaster 33430 Heavy Duty In-Ground Pool Vacuum Hose With Swivel Cuff, 1-1/2-Inch by 30-Feet,Neutral, Hayward SP1106 Skim Vac In-Ground Pool Skimmer , White, Dolphin Nautilus CC Plus Robotic Pool [Vacuum] Cleaner - Ideal for In Ground Swimming Pools up to 50 Feet - Powerful Suction to Pick up Small Debris - Easy to Clean Top Load Filter Cartridges, "See-thru" design for fast and easy cleaning, Long-wearing brushes quickly loosen tough algae spots, Extend your reach 7.5 to 20 feet with this 3-stage telescoping extension pole, Great for hard-to-reach surfaces, like high outdoor windows, without the need of a ladder, Not made to work on automatic suction type cleaners, (or robotic) pool cleaners; for use with standard swimming pool vacuum head and telescopic pole for manual vacuuming, Swivel cuff for kink-free maneuverability; UV and chemical resistant; extruded flexible EVA and poly-welded EVA cuffs, Large skimmer vacuum plate with 1-1/2-inch straight adapter, Fits Hayward swimming pool skimmer SP1082, 1084, 1085, 1075 models. If youre still having trouble, check out this troubleshooting guide for some quick tips. This could damage the cleaner and/or the pool wall. This is the safety-alert symbol. Hello, free time! Do not put the box on its side to remove content as some parts may fall out of the box and get damaged. Comment document.getElementById("comment").setAttribute("id","ab43e2f7ff8092b4a40de4790695ac4a");document.getElementById("afe6277d1c").setAttribute("id","comment"); Save my name, email, and website in this browser for the next time I comment. Operation instructions and warranty pack with product information (serial and model number). Now you'll just move the vacuum head back and forth along the surface of the pool until its clean. The first thing you'll need to do is to prime your vacuum by purging all the air from your vacuuming system. A skim vac (or vacuum plate) allows you to use the skimmer basket instead of the pump strainer basket, eliminating the need to turn the pool pump on and off. To limit overheating and reduced performance, it is recommended to keep the control unit out of direct sunlight and keep the cooling fan unobstructed. Leaving the control unit on the pool deck is acceptable but precautions should be taken so it does not get damaged by regular traffic around the pool or by playing children or pets. Save my name, email, and website in this browser for the next time I comment. But if your pool water is a little dirtier than normal, choose the waste setting.Once youve vacuumed your pool, its important to follow your manufacturers instruction for cleaning and backwashing the filter to keep it running properly. When installing and using this electrical equipment, basic safety precautions should always be observed including the following. Drain the cleaner completely before storage and remove all remaining debris from the canister. Its the most inexpensive option and I recommend it for pools with only dirt and debris problems.3. Clear the pool of any large objects that might interfere with the cleaners operation. Do not bury cable. Home Hayward HAYWARD R-QRG0990 Aquashark Series Robotic Cleaner User Manual, HAYWARD R-QRG0990 Aquashark Series Robotic Cleaner. Let the Dolphin Nautilus CC Plus robotic vacuum cleaner take over your pool cleaning duties for good. Before using the cleaner, remove any items such as thermometers, toys and other accessories from the pool. Connect the end of the hose to the other end of your pole. The cleaner control unit should be located at least 3.5 m (11.5 ft.) from the closest edge to the pool. Its probably the quickest and most effective type of unit, but can get a little pricey. When not in the pool, keep the cleaner away from direct sunlight or store it in a protected area. When you see this symbol on your equipment or in this manual, look for one of the following signal words and be alert to the potential for personal injury. Connect the telescoping pole to the vacuum head. Do not use if damaged or if any rough edges are visible on the cleaner. Remember: The cleaner your filter is, the more efficient your unit will perform. The control unit should preferably be kept in a shady area and the cooling fan kept unobstructed. on HAYWARD R-QRG0990 Aquashark Series Robotic Cleaner User Manual, OPERATION INSTRUCTIONS AND IMPORTANT INFORMATION, HAYWARD HP31005T Pool Heat Pump Owners Manual, Opodee Robotic Vacuum Cleaner Instruction Manual, amibot Flex Laser Robotic Vacuum Cleaner User Guide, Ultenic U11 Series Cordless Vacuum Cleaner Instruction Manual, tecbot TG Series Robot Vacuum Cleaner User Manual, Innopro Technology EB15 Smart Button User Manual, logitech MK345 Wireless Keyboard and Mouse Combo User Guide, BLU PRODUCTS BLUSTX5MX Mobile Phone User Manual, VENTRAY DW55AD Portable Countertop Dishwasher with Air-Dry Function User Guide, instagrid Navodila V1.0 ONE Max Portable Power Station User Manual, KLIM Unity Wireless Keyboard and Mouse Set User Guide, SUNFORCE 80033 Solar String Lights with Remote Control Instruction Manual. Remove the cleaner by pulling it out of the water using the handle on the cleaner. With dual scrubbing brushes and superior filtering capabilities, you can relax knowing your pools floor and walls are left exceptionally clean.
Turn on the water and submerge the vacuum into the pool. Theres no doubt about itmaintaining a clean and healthy pool takes some work, but with a few tips and tricks of the trade, youll be a pro in no time! Maximum operating depth: 3 m (10 ft.). When this happens, your vacuum will not be able to clean it upit will float around for a while and later settle at the bottom again.
This inlet creates extra suction for lifting fine or heavy debris. The cleaner should only be used with the provided cleaner control unit, which supplies only Safety Extra Level Low Voltage (SELLV) to the cleaner. Carefully read the operation instructions and warningdocument first. Pools with excessive amounts of debris should be vacuumed manually before using the cleaner. During its cleaning cycle the cleaner may not climb the wall or any vertical surfaces every time. Such items may cause damage to the cleaner or the pool. To minimize cord twisting, completely unroll and straighten the cable before putting the cleaner the pool. All electrical wiring MUST be in conformance with applicable local codes and regulations (See table at end of document). The Aquashark has an adjustable handle. To reduce the risk of electric shock, DO NOT USE AN EXTENSION CORD to connect control unit to electrical outlet. To protect from permanent damage, if the cleaner is exposed to extremely hot ambient temperature, the power-supply will limit or suspend operation until its temperature is down to an acceptable operating level. Algae can adversely affect the operation and performance of the cleaner. Empty and clean the filter, when needed, to maintain optimal performance. Do not operate outside the pool. Your email address will not be published. Vacuum hoses are also universally made to attach to all systems.
Chemical balance of water may affect cleaner performance, accelerate wear of certain parts, and may lead to more frequent maintenance. Before working on any equipment, disconnect control unit from the equipment. Other methods of cleaning these pools are preferred and a more extensive algae cleaning may be necessary. Based on your region of the world, the cleaner control unit must be connected only to a supply circuit protected by a ground-fault circuit-interrupter (GFCI) or a residual current device (RCD). Heavier debris such as sand, pebbles and rocks may require more frequent cleaning, since they have a greater effect on the weight and buoyancy of the cleaner. Always empty the cleaner filter cartridges or debris canister when filled with debris. Then simply plug your open vacuum hose in to the suction port at the bottom of the skimmer. These universal poles also connect to pool skimmers, nets and hooks, so you probably already have one. Your email address will not be published. WARNING warns about hazards that could cause serious personal injury, death or major property damage and, if ignored, presents a potential hazard. Provide a properly located electrical outlet per local building codes. To keep the pool safe for swimming and protect your equipment, have the water tested frequently and balance chemicals accordingly. Regularly inspect the cleaner, cables and control unit. Do not operate the cleaner with a damaged cable. You might be thinking that a good filtration system is all you need, and believe me, its important! When there are no more bubbles, the hose is air-free and youre ready to start. DO NOT LEAVE THE CLEANER IN THE POOL WHEN CHEMICAL SHOCKING THE POOL. 
Depending on the size and shape of your pool, the entire length of the floating cable may not be necessary. 3164www.hayward-pool.com.au, Opodee Robotic Vacuum Cleaner Instruction Manual - Download [optimized]Opodee Robotic Vacuum Cleaner Instruction Manual - Download, amibot Flex Laser Robotic Vacuum Cleaner Quick Guide. (The other end of your hose should be connected to its spigot). Failure to adhere to the safety warnings below may result in severe injury, death or property damage. The water should be properly balanced (pH level), and the pool free from algae. Operating the cleaner with a full filter will result in reduced performance, limited wall-climbing capability and limited debris pick-up. The handle has two diagonal positions. Check to see that the water is at the recommended level, Check the water chemistry. The handle must be locked in a diagonal position in order to ensure optimal cleaning results. Always disconnect and completely remove the cleaner before entering the pool. Large debris should also be removed manually from the pool before installing the cleaner. Closely supervise children and pets at all times to ensure they do not play with the cleaner it is not a toy. If you choose to use a sand filter as your vacuum filtration method, you'll just need to choose the proper setting. If the control unit power cord is damaged, it must be replaced by the manufacturer, service agent, or similarly qualified persons in order to avoid a hazard. It will minimize algae and help you maintain normal PH levels, making your maintenance a little less time-consuming. Attach the vacuum bag to the proper opening on the vacuum. Operating the cleaner in temperatures above or below this range may affect performance, and cause premature wear or failure. It also makes consumers aware of actions that are unpredictable and unsafe. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
A suction-side cleaner attaches to your pool filter to create suction. Ensure that children do not attempt to access the cleaner while it is operating. It is normal for the cleaner to operate in both forward and reverse directions. Slowly and steadily move your vacuum back and forth along the surface to vacuum the pool and remove dirt and debris. This could create a safety hazard and/or damage to the cleaner. 7 Finally, turn the filtration system back on to remove any residual floating debris. Important note: Be sure not to rush through this job and stir up the debris at the bottom of the pool. The cleaner should not be used to remove plaster dust or construction debris from new or renovated pools. The downside to these is that you have to replace the bags often, but they do reduce wear and tear on your pools filter by collecting their own debris. I recommend a robotic cleaner for large pools or pools with hard-to-reach areas as most can be operated by remote control.
Excessive use is unnecessary and will cause cleaner parts to prematurely wear. CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or property damage and, if ignored, presents a potential hazard. How to vacuum your pool with a garden hose, How to clean your pool with a sand filter, Why it's worth investing in an automatic cleaner, Unger Professional Connect & Clean 7 - 20 Foot Telescoping Extension Multi-Purpose Pole, Window Cleaning, Dusting, Poolmaster 33430 Heavy Duty In-Ground Pool Vacuum Hose With Swivel Cuff, 1-1/2-Inch by 30-Feet,Neutral, Hayward SP1106 Skim Vac In-Ground Pool Skimmer , White, Dolphin Nautilus CC Plus Robotic Pool [Vacuum] Cleaner - Ideal for In Ground Swimming Pools up to 50 Feet - Powerful Suction to Pick up Small Debris - Easy to Clean Top Load Filter Cartridges, "See-thru" design for fast and easy cleaning, Long-wearing brushes quickly loosen tough algae spots, Extend your reach 7.5 to 20 feet with this 3-stage telescoping extension pole, Great for hard-to-reach surfaces, like high outdoor windows, without the need of a ladder, Not made to work on automatic suction type cleaners, (or robotic) pool cleaners; for use with standard swimming pool vacuum head and telescopic pole for manual vacuuming, Swivel cuff for kink-free maneuverability; UV and chemical resistant; extruded flexible EVA and poly-welded EVA cuffs, Large skimmer vacuum plate with 1-1/2-inch straight adapter, Fits Hayward swimming pool skimmer SP1082, 1084, 1085, 1075 models. If youre still having trouble, check out this troubleshooting guide for some quick tips. This could damage the cleaner and/or the pool wall. This is the safety-alert symbol. Hello, free time! Do not put the box on its side to remove content as some parts may fall out of the box and get damaged. Comment document.getElementById("comment").setAttribute("id","ab43e2f7ff8092b4a40de4790695ac4a");document.getElementById("afe6277d1c").setAttribute("id","comment"); Save my name, email, and website in this browser for the next time I comment. Operation instructions and warranty pack with product information (serial and model number). Now you'll just move the vacuum head back and forth along the surface of the pool until its clean. The first thing you'll need to do is to prime your vacuum by purging all the air from your vacuuming system. A skim vac (or vacuum plate) allows you to use the skimmer basket instead of the pump strainer basket, eliminating the need to turn the pool pump on and off. To limit overheating and reduced performance, it is recommended to keep the control unit out of direct sunlight and keep the cooling fan unobstructed. Leaving the control unit on the pool deck is acceptable but precautions should be taken so it does not get damaged by regular traffic around the pool or by playing children or pets. Save my name, email, and website in this browser for the next time I comment. But if your pool water is a little dirtier than normal, choose the waste setting.Once youve vacuumed your pool, its important to follow your manufacturers instruction for cleaning and backwashing the filter to keep it running properly. When installing and using this electrical equipment, basic safety precautions should always be observed including the following. Drain the cleaner completely before storage and remove all remaining debris from the canister. Its the most inexpensive option and I recommend it for pools with only dirt and debris problems.3. Clear the pool of any large objects that might interfere with the cleaners operation. Do not bury cable. Home Hayward HAYWARD R-QRG0990 Aquashark Series Robotic Cleaner User Manual, HAYWARD R-QRG0990 Aquashark Series Robotic Cleaner. Let the Dolphin Nautilus CC Plus robotic vacuum cleaner take over your pool cleaning duties for good. Before using the cleaner, remove any items such as thermometers, toys and other accessories from the pool. Connect the end of the hose to the other end of your pole. The cleaner control unit should be located at least 3.5 m (11.5 ft.) from the closest edge to the pool. Its probably the quickest and most effective type of unit, but can get a little pricey. When not in the pool, keep the cleaner away from direct sunlight or store it in a protected area. When you see this symbol on your equipment or in this manual, look for one of the following signal words and be alert to the potential for personal injury. Connect the telescoping pole to the vacuum head. Do not use if damaged or if any rough edges are visible on the cleaner. Remember: The cleaner your filter is, the more efficient your unit will perform. The control unit should preferably be kept in a shady area and the cooling fan kept unobstructed. on HAYWARD R-QRG0990 Aquashark Series Robotic Cleaner User Manual, OPERATION INSTRUCTIONS AND IMPORTANT INFORMATION, HAYWARD HP31005T Pool Heat Pump Owners Manual, Opodee Robotic Vacuum Cleaner Instruction Manual, amibot Flex Laser Robotic Vacuum Cleaner User Guide, Ultenic U11 Series Cordless Vacuum Cleaner Instruction Manual, tecbot TG Series Robot Vacuum Cleaner User Manual, Innopro Technology EB15 Smart Button User Manual, logitech MK345 Wireless Keyboard and Mouse Combo User Guide, BLU PRODUCTS BLUSTX5MX Mobile Phone User Manual, VENTRAY DW55AD Portable Countertop Dishwasher with Air-Dry Function User Guide, instagrid Navodila V1.0 ONE Max Portable Power Station User Manual, KLIM Unity Wireless Keyboard and Mouse Set User Guide, SUNFORCE 80033 Solar String Lights with Remote Control Instruction Manual. Remove the cleaner by pulling it out of the water using the handle on the cleaner. With dual scrubbing brushes and superior filtering capabilities, you can relax knowing your pools floor and walls are left exceptionally clean.
Turn on the water and submerge the vacuum into the pool. Theres no doubt about itmaintaining a clean and healthy pool takes some work, but with a few tips and tricks of the trade, youll be a pro in no time! Maximum operating depth: 3 m (10 ft.). When this happens, your vacuum will not be able to clean it upit will float around for a while and later settle at the bottom again. This inlet creates extra suction for lifting fine or heavy debris. The cleaner should only be used with the provided cleaner control unit, which supplies only Safety Extra Level Low Voltage (SELLV) to the cleaner. Carefully read the operation instructions and warningdocument first. Pools with excessive amounts of debris should be vacuumed manually before using the cleaner. During its cleaning cycle the cleaner may not climb the wall or any vertical surfaces every time. Such items may cause damage to the cleaner or the pool. To minimize cord twisting, completely unroll and straighten the cable before putting the cleaner the pool. All electrical wiring MUST be in conformance with applicable local codes and regulations (See table at end of document). The Aquashark has an adjustable handle. To reduce the risk of electric shock, DO NOT USE AN EXTENSION CORD to connect control unit to electrical outlet. To protect from permanent damage, if the cleaner is exposed to extremely hot ambient temperature, the power-supply will limit or suspend operation until its temperature is down to an acceptable operating level. Algae can adversely affect the operation and performance of the cleaner. Empty and clean the filter, when needed, to maintain optimal performance. Do not operate outside the pool. Your email address will not be published. Vacuum hoses are also universally made to attach to all systems.
Chemical balance of water may affect cleaner performance, accelerate wear of certain parts, and may lead to more frequent maintenance. Before working on any equipment, disconnect control unit from the equipment. Other methods of cleaning these pools are preferred and a more extensive algae cleaning may be necessary. Based on your region of the world, the cleaner control unit must be connected only to a supply circuit protected by a ground-fault circuit-interrupter (GFCI) or a residual current device (RCD). Heavier debris such as sand, pebbles and rocks may require more frequent cleaning, since they have a greater effect on the weight and buoyancy of the cleaner. Always empty the cleaner filter cartridges or debris canister when filled with debris. Then simply plug your open vacuum hose in to the suction port at the bottom of the skimmer. These universal poles also connect to pool skimmers, nets and hooks, so you probably already have one. Your email address will not be published. WARNING warns about hazards that could cause serious personal injury, death or major property damage and, if ignored, presents a potential hazard. Provide a properly located electrical outlet per local building codes. To keep the pool safe for swimming and protect your equipment, have the water tested frequently and balance chemicals accordingly. Regularly inspect the cleaner, cables and control unit. Do not operate the cleaner with a damaged cable. You might be thinking that a good filtration system is all you need, and believe me, its important! When there are no more bubbles, the hose is air-free and youre ready to start. DO NOT LEAVE THE CLEANER IN THE POOL WHEN CHEMICAL SHOCKING THE POOL. Depending on the size and shape of your pool, the entire length of the floating cable may not be necessary. 3164www.hayward-pool.com.au, Opodee Robotic Vacuum Cleaner Instruction Manual - Download [optimized]Opodee Robotic Vacuum Cleaner Instruction Manual - Download, amibot Flex Laser Robotic Vacuum Cleaner Quick Guide. (The other end of your hose should be connected to its spigot). Failure to adhere to the safety warnings below may result in severe injury, death or property damage. The water should be properly balanced (pH level), and the pool free from algae. Operating the cleaner with a full filter will result in reduced performance, limited wall-climbing capability and limited debris pick-up. The handle has two diagonal positions. Check to see that the water is at the recommended level, Check the water chemistry. The handle must be locked in a diagonal position in order to ensure optimal cleaning results. Always disconnect and completely remove the cleaner before entering the pool. Large debris should also be removed manually from the pool before installing the cleaner. Closely supervise children and pets at all times to ensure they do not play with the cleaner it is not a toy. If you choose to use a sand filter as your vacuum filtration method, you'll just need to choose the proper setting. If the control unit power cord is damaged, it must be replaced by the manufacturer, service agent, or similarly qualified persons in order to avoid a hazard. It will minimize algae and help you maintain normal PH levels, making your maintenance a little less time-consuming. Attach the vacuum bag to the proper opening on the vacuum. Operating the cleaner in temperatures above or below this range may affect performance, and cause premature wear or failure. It also makes consumers aware of actions that are unpredictable and unsafe. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.