(See page 17 for more machine care tips.). Special featuresYour BISSELL PROheat 2X deep cleaner is a home cleaning system that uses the power of heat, brushes and cleaning formula to get the deep down dirt for a maximum clean.
This is important as some dyes and materials could be damaged or discolored by cleaning solvents.
This can be rinsed out at the faucet. Remove the tank from the base of the machine by lifting up on the tank carry handle. Note: Store cleaner in a protected, dry area. 2-in-1 water tank has picked up maximum dirty water and red float door has closed.
Item Part No. 
11.
Plug into a proper outlet and turn the power and heater switches to the ON ( I ) position.
Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, gasoline, etc.). This placement is important when putting the tank back together. F ill the heavy duty bladder with clean hot tap water, following instructions 1c through 1e on page 10.Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank. Freezing will damage internal components and void the warranty.
Keep flex hose snugly in place by using the hose secure latch.
Remove brush rolls by pulling them off of the metal rods. Fill the 2-in-1 Water Tank. Keep plenty of genuineBISSELL 2X formula on hand so you can clean whenever it fits your schedule. Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.)
Home Bissell Bissell Proheat 2x User Manual, PROheat 2XUSERS GUIDE8920, 8930, 8960, 9200, 9300, 9400 SERIES. This allows the user to only carry one tank to and from the sink for emptying and filling.
DO NOT MODIFY THE PLUG .
They are mixed only when you start cleaning and the machine itself measures out a required portion of the cleaning solution. 2.
Carry like a bucket to the sink. One of the most interesting and helpful feature of the cleaning unit is a built-in heating element, providing heating of the received tap water for improving the results of cleaning. It is simple to be assembled, operated, and cleaned after work. ReadyTools dialThis provides either floor cleaning or above floor cleaning with the turn of a knob.
Wait 3-5 minutes. 10. Water rinse (recommended). Comment * document.getElementById("comment").setAttribute("id","acfae099374c2687ff20cd03b9fbf421");document.getElementById("afe6277d1c").setAttribute("id","comment"); Save my name, email, and website in this browser for the next time I comment.
Built-in heater ready light does not illuminate, DirtLifter PowerBrush does not turn Possible causes, Cleaner not picking up solution Possible causes.
Attach the hard floor tool onto the bottom of the machine by hooking it into the nozzle and swinging it down until it clicks into place. Be sure to let the rod slide through the bushing to insure proper fit.
Leaving it for an extended period of time may cause it to set and become permanent. White materials are recommended because certain dyes may bleed and make the stain worse. Allow 1 minute for the built-in heater to warm-up before cleaning. 7.
7. Do not handle plug or appliance with wet hands. Lift the bottom portion of the tank; pour out dirty water in the sink through the triangular shaped opening in the corner of the tank.Note: You may notice hair & debris deposits on the carpet or in the tank that were loosened by the cleaning action.
Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces.
If such a change should occur, try a different solution or call a professional.
Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
Clean under warm water before storing.
Do not service machine when it is plugged in. Dry and replace in the tool caddy.
After carpet is dry, vacuum again to remove hair and fuzz.
Non-BISSELL cleaning solutions may harm the machine and void the warranty. No plug adapter should be used with this appliance.
3. Having a separate solution tank from the water tank also allows no waste of formula. Simply choose one of the 4 settings (heavy traffic, normal clean, light clean, or water rinse) and the PROheat 2X will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need.This feature is available on all PROheat 2X models, either behind the 2-in-1 water tank or on the upper handle. Flow indicator (select models only)The flow indicator is located on the rear cover of your unit.
The inside of the end caps by the brush rolls can be wiped out with a clean paper towel, or, if a more thorough cleaning is desired, the end caps can be taken off using a Phillips head screwdriver and rinsed clean. Release the trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying. 20122022, manualsdir.comAll rights reserved. Flush your machine of any remaining residual solution.
Bissell Crosswave Pet Pro Vacuum Cleaner [2306, 2305] User Manual. Then replace back onto the machine by starting from the bottom of the nozzle and hooking the tabs into the holes on the bottom sides of the machine.
When your cleaning job is finished, the formula can be stored ready to use in your machine for the next time! Remove formula tank from back of machine.
Unscrew the front nozzle and remove it. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. The cleaning effect enhances due to use of cleaning agents offered by BISSELL.
When using an electrical appliance, basic precautions should be observed, including the following:Read all instructions before using your ProHeat 2X.
Any loose hair or debris can be pulled from the brush rolls and thrown away.
Gently work the solution by blotting area with a clean, damp, color safe cloth. Post in the comments!
Take care to do a forward (wet) stroke by depressing the trigger, and a backward (wet) stroke, followed by a forward and backward (dry) stroke, releasing the trigger. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your PROheat 2X.
Close attention is necessary when used by or near children. Custom CleanThe Custom Clean feature automatically mixes hot tap water with the BISSELL formula.
The heater switch on the front of the machine controls the heater so you have the option to turn off the heat if you are cleaning delicate wool or oriental rugs. WARNING:To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.
Empty the 2-in-1 water tank.
8c.
Part Name1 203-7010 T ank Assembly (complete) (Black)2 203-6660 T ank Lid (Black)3 203-6618 T ank Bottom (Black)4 203-6675 C ap and Insert for Water Tank5 203-6676 F ormula Tank (includes Cap & Insert for Formula Tank)6 203-6677 C ap and Insert for Formula Tank7 203-7649 F ront Nozzle (includes gasket)8 203-6679 A utoload Gasket (fits both Water and Formula Tank)9 203-6845 F loat Door10 203-6680 T ank Filter (Lint Screen)11 203-6682 C ord Wrap (Blue Illusion)12 203-6685 C lear End Cap w/Edge Brushes (2 pack, includes screws)13 203-6686 B rush Roll 6 row (includes 1 brush, axle, 2 swivel arms)14 203-6688 S mall Brush Belt (non-cord side)15 203-6804 L arge Brush Belt (cord side)16 203-6689 Hose Secure Latch17 203-6690 Hose Rack Assembly (Top/Bottom Hose Rack, Screws). The ProHeat 2X 8960 is well and reliably constructed with understandable and simple controls, as the manufacturer states that it has been designed with you, the customer, in mind.
Continue passes without pressing the trigger until you cant see any more water being pulled up.
Carry like a bucket to a utility sink or outside where you will dispose of the dirty water.8a.
As you clean, the clean water in the bladder will empty and mix with the cleaning formula. Rinse out 2-in-1 water tank, with running hot tap water, taking care to clean underneath the heavy duty bladder, and all around it.
Empty 2-in-1 water tank and rinse out, following the instructions on page 12. The cord for this appliance has an equipment-grounding conductor and a grounding plug. Both switches must be ON ( I ) to activate the heater ready light, Circuit breaker on machine may have tripped.
*Not all parts are included with every model. Always use genuine BISSELL 2X formulas to maximize cleaning and for the safety of your machine.
Warranty BISSELL PROheat 2XIf you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.
Release trigger and move tool slowly over the soiled area to suction up water and dirt. If cleaning on Berber carpeting, gently run your machine over a hidden area. Before replacing, lift end of hose and stretch out to ensure all water is cleared from hose. Simply choose one of the 4 settings (heavy traffic, normal clean, light clean, or water rinse).
Take care not to drop the screws into the unit.
Make sure machine is secure and level. Because the water and solution are stored separately, they are not mixed until you are ready to clean.
Tip:Let all parts dry completely before storing. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized Service Center.
It provides proof of date of purchasein the event of a warranty claim.
Replace small brush belt, and reverse steps above.
Return front nozzle to front of unit, by latching from underneath and then securing with a screw. Make sure one washer is on each end of the rollers prior to sliding onto the rod. Replace formula tank.
Other maintenance or service not included in the manual should be performed by an authorized service representative.
NOTE: Please keep your original sales receipt. The top half of the tank can be rinsed clean through the nozzle area. Do not use a knife or other utensil with sharp edges because it could damage the carpet or upholstery. 4. If the area has dried, remove the remaining semi-solids and residue with a sweeper or vacuum. Use only on surfaces moistened by cleaning process.
Always install float before any wet pick up operation. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
Always use genuine BISSELL deep cleaning formulas.
The PROheat 2X will be fully warmed and will provide optimal performance after a minute of continuous heated cleaning. Set ReadyTools dial to the TOOLS setting. Remove the tank from the base of the machine by lifting up the tank carry handle.
Since this product uses water, it must not be stored where there is a danger of freezing. Return ReadyTools dial to floor setting. Once the product is in the upright position, the brushes automatically stop spinning. Contact us directly at 1-800-263-2535. Do not use appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors. WARNING:To reduce the risk of due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. Make certain that the appliance is connected to an outlet having the same configuration as the plug. My great-grandfather invented the floor sweeper in 1876.
Do not expose hair, loose clothing, fingers or body parts to openings or moving parts. Warning:Do not plug in your cleaner until you have completely assembled it per the above instructions and are familiar with all instructions and operating procedures. Brushes can be removed for cleaning or replacement as needed. Place cleaned or new brush rolls back onto the rods. Set the Custom Clean dial to NO RMAL clean. Fill the 2-in-1 water tank with hot tap water and set aside.
This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the drawing above.
or use in the presence of explosive liquids or vapor.
In all these respects, BISSELL ProHeat 2X 8960 is an excellent option.
The market offers a variety of devices to maintain cleanliness and order in your home.
Replace after cleaning.
Do not overwet. 5. Thank you for selecting a BISSELL product. Follow instructions 3-6 on page 13 under Cleaning with attachments. Red float door in the tank may have closed as a result of bumping an object or moving machine back and forth too quickly.
Set tool on stain and press the trigger to spray solution onto the area to be cleaned. WARNING:To reduce the risk of fire and electric shock- when cleaning a hard floor, the BISSELL bare floor tool kit 203-5642 must be used and it must only be used with BISSELL Hard Floor Solutions or BISSELL 2X Hard Floor Solutions cleaning fluid intended for use with this appliance.
Refer to page 14.
Turn off the machine, and unplug it from the outlet.
So the BISSELL ProHeat 2X 8960 can give your carpets a new life, offering deep powerful and gentle cleaning with the use of brushes, heat, and cleaning solutions. Follow small belt removal Instructions on page 18.
Place lower hose rack onto back of upper handle by pushing in and sliding down until it snaps into place.
9. It provides proof of purchase date in the event of a warranty claim. Rinse (optional) and suction as needed.Caution: Do no overwet. The heater will never allow the temperature to exceed 190 degrees.
Limited One Year WarrantySubject to the *EXCE PTIONS AND EXCLUSIONS identified below, BISSELLC anada Corporation will repair or replace (with new or remanufactured components or products), at BISSELL s option, free of charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part.See information below on If your BISSELL product should require service.This warranty applies to product used for personal, and not commercial or rental service. Rinsing is an optional step that can be done during the cleaning process or after the carpeted area has been completed.
Though made of plastic, it feels powerful and durable.
If no fuzzing occurs, continue cleaning in soiled area.
Caution: Do not overwet. Replacement parts BISSELL PROheat 2XBelow please find a list of common replacement parts.
Please see Stain Removal instructions on page 15. Scotchgard ProtectorCarpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning.
6.
Turn power and heater switches OFF (O).
Bissell 1425 Series Little Green Proheat User Guide - Download [optimized]Bissell 1425 Series Little Green Proheat User Guide, Bissell 66Q4/73a5 Series ProHeat 2X Healthy Home User Guide - Download [optimized]Bissell 66Q4/73a5 Series ProHeat 2X Healthy Home, Bissell Proheat 2x Revolution User Manual Bissell Proheat 2x Revolution Other Top Bissell User Manuals: BISSELL 2859 Series, Bissell 2156 Powerforce User Guide - Download [optimized]Bissell 2156 Powerforce User Guide - Download, Why do I have to pay $5 dollars when it is in warranty and I do not have credit card, Your email address will not be published.
Slowly move the machine forward and back over hard floor surface one time while depressing trigger.
But most importantly, each of us would like to buy a machine which can effectively serve and suit just for your home. For the most thorough clean before storage, follow directions on pages 18 & 19 for removal and replacement of the brush rolls and belts.
3.
The formula tank can remain filled and ready to go. Plug into an outlet and turn the power switch and heater ON ( I ).
WARNING: To reduce the risk of injury, be extra careful when cleaning stairs. Slowly move the tool back and forth over the soiled surface.
Before you place the cleaned 2-in-1 water tank back onto the machine, simply unscrew the floor nozzle using a Phillips head screwdriver. Set Custom Clean dial for heavy traffic, normal clean, light clean, or water rinse as desired.
Do not use for any purpose other than described in this Users Guide.
For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services1-800-265-2535Monday Friday 8 a.m. 10 p.m. ETSaturday 9 a.m. 8 p.m. ETOr write:BISSELL Homecare, Inc.PO Box 3606Grand Rapids MI 49501ATTN: Consumer Services, Or visit the BISSELL website www.bissell.caWhen contacting BISSELL, have model number of cleaner available.Please record your Model Number: _______Please record your Purchase Date: _______. Check with a qualified electrician or service person if you arent sure if the outlet is properly grounded. To help restore this important protection, only BISSELL offers deep cleaning formulas with Scotchgard protector. Questions about your Manual? Machine careFor best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. Always use genuine BISSELL deep cleaning formulas. Plug in and turn on the power switch and heater (if desired). Your PROheat 2X comes in three, easy to assemble components:Upper HandleLower HandleTool CaddyThe only thing you will need to assemble your cleaner is a Phillips head screwdriver. Vacuum or sweep thoroughly to pick up any loose debris and pet hair.
Cleaning fluidKeep plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever it fits your schedule.
ET Saturday 9 a.m. 8 p.m. ETOr write: BISSELL Homecare, Inc.PO Box 3606 Grand Rapids MI 49501ATTN : Consumer Services. Continue this until the water you see coming up the nozzle is clear. Using the BISSELL Tough Stain PreCleaner, spray evenly over soiled area.
No other home deep cleaning system can do this for you. 9. Cleaning with attachmentsYour PROheat 2X machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. Stalling brush may result in premature belt failure.
Herewith there is a heater on/off switch for you to change the water temperature depending on what kind of carpet you are going to clean.
See Warranty on page 24 for details. Attending to an accident soon after it occurs ensures the most optimal clean. Fill the formula tank to WATE R line with water. Before replacing lift end of hose and stretch out to ensure all water is cleared from hose. ATTENTION:Some Berber carpets have a tendency to fuzz with wear.
Caution: Do not use on unsealed hardwood floors.
Remove the top of the tank by lifting up on the handle.Note: how the lip on the top tank separates from the groove in the bottom tank. Do not point attachment nozzle at people or animals. Choose TOOLS setting for stairs, upholstery and hard to reach areas and FLOOR CLEANING for carpets area rugs and bare floors.
Fill with water to WATE R line and then fill up to FO RMULA line with BISSELL 2X Concentrated formula.
Release the trigger to suction soiled water.
5. Be careful not to lose the small washer at each end of the brush rolls.
The ProHeat 2X 8960 features two brush rolls which rotate and penetrate into the fibers of your carpet to lift out the dirt from the very bottom, while tenderly brushing the carpet fibers, so that you can do this work frequently enough, if needed. Keep openings free of dust, lint, hair, etc.
The function is customized, as you can select one of the 4 different settings: normal, heavy, or light cleaning, and plus water rinsing only. It is recommended that you suction clean water from a bowl to rinse out the hose. Required fields are marked *.
Set ReadyTools Dial to the floor cleaning setting. This warranty does not apply to routine maintenance components such as belts or brushes. Attending to an accident soon after it occurs ensures the most optimal clean. Clean by pressing the trigger to spray solution onto the area to be cleaned.
If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Services.
Use only manufacturers recommended attachments. This offers extra protection against dirt and tough stains to keep your carpets looking good longer.
Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
2-in-1 water tankOur 2-in-1 water tank full capacity system is designed with a heavy duty bladder inside for clean water. If not, these products are available for purchase by contacting the BISSELL Consumer Services department by phone or at the website.
Always check the level of cleaning formula in the formula tank at the same time, and refill as needed. Be sure to test any spot removal formulas in an inconspicuous area first.
Always connect to a properly grounded outlet.
Always use genuine BISSELL deep cleaning formulas. Remove hard floor tool, rinse and dry before storing. Remove the clear end cap by unscrewing the 2 black screws. Set ReadyTools dial to the FLOOR CLEANING setting.
Were glad you purchased a BISSELL PROheat 2X heated formula deep cleaner. Fill the formula tank by first unscrewing the cap and insert. BISSELLS LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
By using your BISSELL PROheat 2X machine with BISSELL 2X formulas containing Scotchgard protector every 12 months, your carpet warranty from 3M remains in effect.
While pressing the trigger, make one slow forward wet pass and another one back.
13. Unplug the machine and wrap the power cord. Re-attach the long belt on the bottom to the cogs of the small roller brushes. Simply select a necessary setting, and the machine will regulate the quantity of the cleaning agent to be added to water.
Clean using either the FLOOR CLEANING, or TOOLS setting on the ReadyTools dial. Occasional replacement of one or both belts may become necessary.
Place upper hose rack onto back of upper handle, and secure with screw.
8.
WARNING:To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. This will allow spray and suction from the hose.
12. The floating suspension self-adjusts to all carpet heights and protects your carpet if you leave the power switch ON ( I ).
Website: www.bissell.caE-mail: [emailprotected]Or Call: BISSELL Consumer Services 1-800-263-2535Monday Friday 8 a.m. 10 p.m. Part Name1 203-6651 3 Tough Stain Tool2 203-6652 Powered TurboBrush Hand Tool3 203-6653 4 Upholstery Tool4 203-6654 6 Stair Tool5 203-6655 S praying Crevice Tool6 203-5642 B are Floor Tool with trial size bottle of Hard Floor Solutions formula7 203-7412 D eep Reach Pet Tool8 62E5 2X Fiber Cleansing Formula with Scotchgard Protection.9 99K5 2X Pet Stain and Odor Formula with Scotchgard Protection.10 89Q5 2X Allergen Cleansing Formula.11 78H6 2X Professional Deep Cleaning Formula with Scotchgard Protection.12 56L9 2X Hard Floor Solutions Formula.13 400 T ough Stain PreCleaner.
Your email address will not be published. Gently scrape up any semi-solids with a spoon or spatula.
It depends on what your needs are.
The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors.
BISSELL CANADA CORPORATION IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. Dry and replace attachment in the tool caddy.
Follow the instructions on page 10 for filling the 2-in-1 water tank and the formula tank.
Take care not to run over loose objects or edges of area rugs.
NOTE: Please keep your original sales receipt. A cleaning agent automatically mixes up with water, and when you send the water cleaning solution to your carpet, all the hidden ingrained dirt on the carpet is sucked off. Accessories BISSELL PROheat 2XItem Part No.
4.
Secure into place with the screw. Place small belt over back roller and metal cog. If that is needed, please follow the instructions below. When the unit runs out of water or solution the flow indicator will instantly let you know.
Stain removalDo Not Delay!
Dirty water pulled out of your carpets will collect around the outside of the bladder so that clean and dirty water are always kept separate.
Machine storageOnce your cleaning is complete, make sure the 2-in-1 water tank is emptied, rinsed out, and dried before the next use. Improper connection of the equipment grounding conductor can result in a riskof electrical shock.
Place pivot arm in place and screw in place using the silver screw.
WARNING:To reduce the risk of fire, electric shock, or injury,turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. Set aside. Bissell 1425 Series Little Green Proheat User Guide, Bissell 66Q4/73a5 Series ProHeat 2X Healthy Home User Guide, Bissell Proheat 2x Revolution User Manual, Polaris Forza PAG100C Above Ground Pump Owners Manual, RYOBI ACSN02 SKID SHOE REPLACEMENTS User Manual, SYNTHGENE RQ005 SARS-COV-2 Nucleocapsid(N) Antigen Rapid Detection Kit User Manual, Super ATV 2753 Michigan Road Installation Guide, RAB X17 FIELD ADJUSTABLE FLOODLIGHT SELECTABLE PHOTOCELL Instructions, Panasonic Corded Cordless Phone User Guide, GE Appliances GDF550PGR Front Control Dishwasher Installation Guide.
Due to a bundle of unique features, the ProHeat 2X 8960 is an indispensable assistant in your home. Re-attach clear end cap by tightening with the (2) black screws.
Refer to the Scotchgard protector warranty for details.
Unlatch the top of the tank from the bottom by lifting up on the tank latch located on the back of the tank.8b.
Remove both the 2-in-1 water tank and the formula tank. Slowly move the tool back and forth over the soiled surface, keeping the tool in contact with the carpet. When you choose a home appliance, perhaps, above all you think about its performance and price. 2.
Do not put any object into appliance openings, use with blocked opening, or restrict air flow. We have 1 Instruction Manual and User Guide for ProHeat 2X 8960 Bissell.
6. Blot up liquids with an absorbent cloth or paper towels.
Note: Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll.
To clean attachments that may have been used, remove from hose and rinse under clean, running water. It belongs to a series of the BISSELL deep cleaning machines including the BISSELL ProHeat 2X 8920, 8930, 8960, 9200, 9300, 9400, 9500 models, which offer you the possibility to maintain your various carpets clean and fresh with no repugnant allergens, mold or mildew due to the availability of a number of remarkable features, giving almost professional results.
Switch to the water rinse setting, on the Custom Clean dial and follow the same path as you did for cleaning.
Your BISSELL PROheat 2X is well made, and we back it with a limited one year warranty.
Continue to clean in the area, working in small sections, until no more dirt can be removed. Set aside. Do not leave machine when it is plugged in. Follow the instructions on page 10 for filling the 2-in-1 water tank and the formula tank. Fill to FORMULA line with BISSELL 2X Hard Floor Solutions.
The detent pedal will activate the brushes when floor cleaning. Replace before putting the top and bottom halves of the tank together. Continue to clean the area, working in small sections, until no more dirt can be removed. It has an extra long power cord, which increases your reach and allows you to perform your work in many rooms without stopping and changing outlets.
Unplug by grasping the plug, not the cord.
Please do not return this product to the store.For any questions or concerns, BISSELL is happy to be of service.
If that happens, be sure to unplug your machine, remove the foreign object, and then plug the machine back in to reset the circuit breaker.
Remove tool from hose when finished. Attach the cleaning tool to the end of the hose.
8.
Dual DirtLifter PowerBrushesThe two DirtLifter PowerBrush rolls are designed to enhance cleaning performance.The bristle pattern safely lifts out the deep down dirt while gently grooming carpet fibers. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired.
To maintain your Scotchgard 5-year limited stain warranty, you no longer are required to hire a professional. Not only does it with come several unique features, it has been designed with you, the customer, in mind. 6. This debris should be picked up and thrown away.8d. Non-BISSELL cleaning solutions may harm the machine and will void the warranty.
7.
8.